The C.W. Hood Katama 30 was designed primarily for use as a high-performance classic weekender, racing syndicate, or commuter yacht. Because of her superior hull design and her standard bow thruster (which is integrated into the ship’s steering system with the use of a joystick control), the Katama 30 is simple to operate and maneuver. The deck, cockpit, and interior are well thought out with a place for everything onboard. In this design, there is a high priority placed on ergonomic functionality, which consequently gives the owner / operator a predictable, comfortable, and enjoyable boating experience. The Katama 30 combines the best of traditional aesthetics with the finest materials and modern construction techniques available.

Vacuum-bagged, cored construction using bi-axial fiberglass materials for lasting strength
Structural grid with molded tanks and bilges
Polished gelcoat surfaces throughout
Molded rubrails and quarter guard rails with polished stainless steel
Black Awlgrip topsides
Bristol beige deck
White bootstripe
Gold Awlgrip cove stripe

Cored construction with molded nonskid
Flush-mounted hardware throughout
(2) Anchor locker access hatches with stainless steel hatch dogs
Muir anchor windlass-controls on dash and deck
Bruce claw style anchor
Anchor rode:10′ chain; 200′ 8-braid line
(2) fuel (2), water and waste deck plates
Varnished teak windshield with safety glass; bottoms flip up for ventilation
Varnished teak toe rail with (6) custom integrated stainless steel chocks
(2) Varnished teak handrails on cabin top
Varnished teak eyebrows on cabin sides
Large, tinted opening hatch on cabin top
(4) Stainless steel opening portlights
Stainless steel pop-up bow cleat (10″)
(2) Stainless steel pop-up spring cleats (8″)
(2) Stainless steel pop-up stern cleats (10″)
(2) Stainless steel engine room vents
(2) Recessed side deck drains empty overboard at waterline
USCG approved navigation lights
(3) Variable speed electric windshield wipers with washing jets
Varnished teak pole
Varnished teak burgee pole

Self-bailing with flush, stainless steel drains
Removable deck panels throughout for complete access to systems and bilges
Molded fiberglass engine box with gas lifts, day/full access and seating on top.
(2) Molded fiberglass storage boxes with varnished teak louvered sliders
(2) Large bilge/storage hatches with stainless steel hatch dogs
Hinged aft bench with teak face and large storage compartment beneath
Pompanette Prestige helm chair with Ultraleather upholstery and teak ladder back
Varnished, louvered teak companionway door with tinted overhead hatch and lock

Hinged helm station provides complete access to electronics and wiring
Navigation electronics are mounted on a custom receding cabinet
Faria engine gauge package
Custom engraved stainless steel wheel with teak accents (16″)
Kobelt single lever throttle/shifter
Joystick
Richie compass
Bass backlit breaker panel
12V DC power outlet

Isotherm dual voltage undercounter refrigerator
Origo alcohol/electric two-burner cooktop
Removable cutting board
Tappan microwave
Skandvik stainless steel undermount sink
Skandvik single lever tall chrome faucet
White Corian countertop
Hinged garbage bin
Ample storage compartments
iSeries tank systems monitor

Bulkheads finished in off-white Formica with teak accents
Interior hull sides finished in off-white V-groove panels
(2) drawers under v-berth
Interior lockers
Classic varnished teak and holly sole
(2) Sunbrella v-berth cushions and insert cushion
(3) Frigast overhead red/white cabin lights
(2) Frigast bulkhead reading lights
Xintex CO Sentinel carbon monoxide alarm

Enclosed head plumbed for hot/cold shower
Jabsco Quiet-Flush electric marine toilet
Showerall faucet
Corian countertop
Vanity mirror, toothbrush and cup holder, towel rack and toilet paper holder

ProSine 2.0 2000 watt inverter/charger
(2) 12V extreme duty AGM marine batteries
Battery selector switch
Bass backlit breaker panel
High quality tinned wire throughout
30 amp power cord

Mechanical
Yanmar 440 hp engine-6LY2A-STP
MJP UltraJet 305
Bow thruster
Mermaid AC/Heat 6,500 BTU system
(4) Noise/vibration reducing engine mounts
Soundown sound deadening insulation (2″)
Quiet Centek wet exhaust system
Double-gasketed hatches in engine area
Bronze raw water strainer with scoop
Manual fule tank selector manifold and valves
Racor fuel filter
Monitoring system for all onboard tanks
(2) Electric bilge pumps
High-capacity manual bilge pump
Labeled Marelon seacocks with plugs

Raymarine C-70 Radar, GPS, Chartplotter, Fishfinder
Raymarine C-80 8.4″ MFD
Raymarine ST6001 Autopilot
Raymarine ST60 Graphic display instrument

Clarion Marine M475 sat ready, CD player, FM/AM, MP3
Clarion remote at helm

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.